Friday, 23 December 2016

HAMMELMANN Airport Runway Cleaning Solutions

Airport Runway cleaning
Sound proofed high pressure water vehicle specifically for the purpose of flight safety, which is employed to remove.
  • Tyre rub-off on (take-off and landing) runways
  • oil and fuel grime on aprons
  • runway markings

The various types of deployment vehicles can be equipped with a continuous adjustable hydraulic low-speed drive, marking it possible to proceed steadily even at extremely low speeds - eg, during runway marking work.
The continual increase in air traffic necessarily leads to increased tyre rub-off on runways. The danger of skidding resulting from slippery runways is familiar to airport safety experts, for which reason frictiontests are conducted regularly.
If we are to ensure the highest possible degree of safety during landing, it must become standard practice at today ́s airports toremove tyre rub-off before it
reaches the critical limit.

Hammelmann Application for Aerospace Industry

Hammelmann Application for Aerospace Industry

Reconditioning turbine blades

Application examples

  • Heat shield tile removal

  • Paint and insulation removal

  • Intensive cleaning of metal

  • surfaces for post flight inspection

  • Reconditioning turbine blades



Image of Aerospace Booster Rocket
Surface preparation on a booster

Thursday, 15 December 2016

Surface Preparation Solutions from Hammelmann

Surface preparation is the essential first stage treatment of a material substrate before the application of any coating, and is generally accepted as being the most important factor affecting the total success of a corrosion protection system.

 High-pressure surface preparation is not only economical, but with so many environmental advantages it is swiftly becoming the preferred process for coating removal by many major industries.  High Pressure technology delivers the power to clean the most difficult surfaces down to white metal quickly and cost effectively using a minimum amount of water.

 Image of Spider Jet

 Spiderjet Spider jet is a semi-automatic device used in shipping industries for surface preparation using ultra high pressure up to 3000 bar.
    • This unit can be used for stripping vertical inclined and horizontal surfaces.
    • The Spider jet attaches to the work surface by vacuum force at is driven by a pneumatic motors.
    • The vacuum also retrieves all waste water and removed solids.

    Image of RD FLex 3000
    RD Flex 3000 This is a high pressure cleaning accessory used in High Pressure Guns for renovation like surface layer removal, Paint removal, concrete removal, expansion joint removal, Paint booth grid & skid clean up, Hull deck and superstructure surface preparation.
    • Pressure up to maximum 3000 bar.
    • Flow rate up to 30 liters per minute.
    • Rotation speed from 1000 to 4000 RPM
    Image of FRV 3000
    FRV-3000 Cleaning equipment used for on deck cleaning, paint booth cleaning and or various other surface preparation using high pressure spray bars. A vacuum system is attached to this equipment in order to collect the waste water and debris from the surface. The maximum operating pressure is up to 3000 bar.
    Image of Hand Aquablast
    Hand aquablast It is a cleaning device used for surface preparation using a vacuum system operated manually. Cleaning, striping vertical surfaces. Ship repair- removal of marine growths, stripping hull coatings Construction Industry: removal of paints and for other concrete surfaces.